MICRO-EPSILON
X9751109-B060097MSC
11
Functioning Principle, Technical Data
3.2
Technical Data
All specified data applies to metallic mattfinished surfaces.
1) For standard measurement range, slight displacement of the measuring field possible (depends on sensor)
2) 1024 points per profile with extended measurement range and 128,000 points/s (optional 256,000 points/s) only.
3) Only applies to values preprocessed in the controller, e.g. width, height, glue bead area, edge detection, groove width, angle etc.
4) Preassigned, other functions possible, e.g. encoder.
5) The data apply to the sensor.
Model
LLT28x0-25
LLT28x0-100
Standard measurement ranges, typical values (±5 %) for extended measurement range in brackets
Measurement range, z axis
25 (55) mm
100 (245) mm
Start of measurement range (SMR)
62.5 (50) mm
145 (115) mm
Reference distance, midrange
75 (82.5) mm
195 (235) mm
End of measurement range (EMR)
87.5 (105) mm
245 (360) mm
Resolution z axis
1
0.04 %
10 µm
40 µm
Linearity z axis (3 )
1
0.2 %
50 µm
200 µm
at SMR
13 (23) mm
30 (50) mm
at EMR
18 (41) mm
50 (140) mm
Aperture angle of the laser line
Resolution x axis
at SMR
60 µm
120 µm
at EMR
80 µm
200 µm
Resolution profile parameters
Profile frequency (profiles/second)
Measurement rate (measuring points / s)
Light source
Laser class (EN 60825-1)
Laser switch-off
Permissible extraneous light (fluorescent lamp)
Operating temperature
Storage temperature
Electromagnetic compatibility
(EMC)
Vibration (acc. to IEC 60068-2-6)
5
Shock (acc. to IEC 60068-2-29)
5
Sensor dimensions (without cable)
(LxWxH) mm
109 x 64 x 44
125 x 64 x 44
Sensor weight (without cable)
350 g
400 g
Sensor connecting cable, standard length
Controller dimensions (without connectors)
Controller weight (without cable)
Output analog
preassigned: x and z axis,
alternatively: profile parameters
3
Interfaces
Digital inputs
4
Digital outputs
4
Power supply
Laser diode 655 nm, 15 mW (optional 50 mW)
Sync-In, Remote laser ON/OFF, User mode, Encoder
± 10 V (16 Bit, up to 150 kHz)
R
l
= 50 Ohm, I
max
= 5 mA
Class 2M (optional: 3B)
Sensor IP 64, controller IP40
Remote input and key switch
15 g / 6 ms
Measurement range x axis
RS232 / RS422; 115,200 Baud
30 °
256 / 512 / 1024
2
, optional 64 / 128 points/profile
10,000 lx
-20...70 °C
3x IEEE 1394 („FireWire“), 400 MBit/s,
DCAM 1.30 Standard
2 m
L x W x H 278 x 187 x 107 mm
3.5 kg
Linearity x axis (3 )
1
0.4 %
Serial (measurements and control commands)
Switching signals
24 VDC ± 15 %; 0.5 A
up to 1000 profiles/s (optional up to 4000 profiles/s)
up to 256,000 measuring points / s
0...50 °C
Sync-Out, error, user mode (2x)
EN 61000-6-3 Spurious emission
EN 61000-6-2 Resistance to disturbance
0.05 %
Protection class
2 g / 20 ... 500 Hz
s
s
