Page 1
scanCONTROL 25xx
Assembly Instructions
scan
CONTROL
2500/BL / 2510/BL
1.
Warnings
Connect the power supply and the display/output device according to the safety
regulations for electrical equipment. The supply voltage must not exceed the specified
limits.
> Risk of injury, damage to or destruction of the sensor
Avoid shocks and impacts to the sensor. Avoid constant exposure of the sensor to
dust and splashes of water. Avoid exposure of sensor to aggressive media (detergents,
cooling emulsions).
> Damage to or destruction of the sensor
2.
Notes on CE Marking
The following apply to the scanCONTROL 25xx/BL measuring system:
- EU Directive 2014/30/EU
- EU Directive 2011/65/EU
The measuring system is designed for use in industrial applications.
The measuring system satisfies the requirements if the guidelines in the operating inst-
ructions are maintained in installation and operation.
3.
Proper Environment
- Protection class: IP65
- Temperature range:
Operation:
0 ... +45 °C (+32 ... +113 °F), when air is circulating freely
Storage:
-20 ... +70 °C (-4 ... +158 °F)
- Humidity:
5 - 95 % (non-condensing)
