Page 27
induSENSOR, EDS
4.4
Power Supply and Display/Output Device
4.4.1
Model EDS- ... -S
The power supply and the signal output are effected through 7-pin connector on the sensor’s electronic
housing. The pin assignment is shown, see
View on solder pin
side, female cable
connector
Fig. 18 Binder con-
nector Type 702
Pin
Assignment
Color
C703-5
Pin 2 is connected with
pin 4 on the electronics
board. The screen of the
sensor cable is connected
with the connector hous-
ing. Connect the screen of
the sensor cable with the
protective earth conductor
on power side.
1
Power supply + (18 ... 30 VDC)
white
2
0 V Ground
brown
3
I
OUT
4 ... 20 mA
1
green
4
Signal ground
yellow
5
SCL (Sensor calibration)
grey
6
SCL (Sensor calibration)
pink
7
n.c.
blue
Fig. 19 Connection pin assignment, 7-pole
The sensor cable C703-5 and C704-5, length 5 m, are available as an accessory.
1) Output voltage of 1 up to 5 V with the C703-5/U supply and output cable.
