Page 2
MICRO-EPSILON Eltrotec GmbH
Man
f
red-
Wö
rner-Straße 101 · 73037 G
ö
ppingen / German
y
Tel. +49 (0) 7161 / 98872-300 · Fax +-49 (0) 7161 / 98872-303
[email protected] ·
www.micro-epsilon.com
colorSENSOR OT-3
Series
•
True Color Sensors
Instruction Manual
colorSENSOR OT-3-HR-50
Type
OT-3-HR-50-12.5
OT-3-HR-50-25
Light source
Illumination technique
Effect of illumination
Target distance
Light spot size
Ø 12.5 (12.5 dia.) mm at 50 mm
Ø 25 (25 dia.) mm at 50 mm
Reproducibility
Color distance
Receiver
Alternating light operation
Ambient light
Protection class
Current consumption
Interface
Connector type
Connection cable
Housing material
Operating temperature
Storage temperature
Pulse lengthening
Max. switching current
Switching frequency
Outputs
Averaging
Voltage supply
Switching state display
Color memory capacity
TEACH button
Temperature drift X,Y
Signal gain
EMC test
Color spaces
Polarisation filter, focused
very intense reduction of gloss effects, adapted for highly reflected surfaces
AC: typ. 10 kHz up to 40 kHz
depends on the gain step (AMP1 up to AMP8)
DC:adjustable via PC software
up to 5000 Lux (in AC-operation)
in the X, Y color range each 1 digit at 12-bit A/D conversion
'
E
t
0.8
3-color filter detector (TRUE COLOR Detector, color filter bend according to CIE 1931)
to PLC: 8-pole female connector (Binder series 712)
to PC: 4-pole female connector (Binder series 707)
to PLC: CAB-M9-8P-St-ge; xm-PUR; open
to PC: CAB-M5-4P-St-ge; xm-PUR; RS232; CAB-M5-4P-St-ge; xm-PVC; USB
IP 67 (optics), IP 64 (controller)
typ. 320 mA
RS 232 (USB optional)
Aluminum, anodized in black
-20°C - + 55°C (-4°F up to +131°F)
-20°C - +85°C (-4°F up to +185°F)
adjustable 0 ms up to 100 ms
for external teaching of color reference values via input IN0
100 mA, short-circuit-proof
max. 30 kHz (depends on the number of teach-colors and averaging value)
OUT 0 - OUT 4, digital (0V/+Ub), short-circuit-proof
100 mA max. switching current npn-, pnp-available
(bright-, dark-switching can be switched over)
over 32768 values max.
X/Y INT; s/i M (Lab)
typ. 20 mm up to 80 mm
ideal distance at 50 mm
8x white light LED
AC-, DC-operation (adjustable or OFF in case of luminous objects adjustable via software)
< 0.01% / K
8 steps (AMP1 - AMP8), adjustable
according to DIN EN 60947-5-2
+24 VDC (± 10 %), protected against polarity reversal, overload protected
Visualization by means of 5 yellow LED's
non-volatile EEPROM with parameter sets for 31 colors max.
Technical Data
