MICRO-EPSILON colorCONTROL MFA-5, Instruction Manual, Page: 36 / 80

Page 36
Operation
colorCONTROL MFA-5
5.2.4 Color Test and Comparison of Several LEDs
5.2.4.1 Test and Comparison of LEDs with Different Light Intensities
In order to compare LEDs with each other, you use the
Measurement
window in combination with the
Mea-
surement settings window, see Fig. 24 , see Fig. 25 , see Fig. 26 .
It is recommended to first determine the optimum settings of the checkpoints via the start screen, see Chap.
5.2.3 . These are adopted when the Measurement settings window is opened.
It is displayed at the same time during the adoption of the exposure time and color chip range whether a
checkpoint / color chip has an offset.
Example:
In the following example, see Fig. 24 , 5 checkpoints / color chips have been set using the main screen.
Thereby, the checkpoint 4 (color chip 4) has a permanently stored offset.
Fig. 24 List of settings window