MICRO-EPSILON 4350006.71, Operating Instructions Manual

Page: 58 / 254

Page 58
Instruction Manual Software
thicknessCONTROL MTS 8201.LLT / 4350006.71
5.15 Interface Guide System
The measuring system can communicate with the guide-system via an defined EthernetIP interface. Transferred data
can be displayed in the view Interface.
Fig. 65 Interface Guide System
PLC =>ME
Named Address AB Adress TWinCAT
Name Description
O.Data[2].0 +0.0 Alive Signal Bit
O.Data[2].1 +0.1 Enable Measure-
ment Bit
O.Data[2].2 +0.2 Start Measurement Bit
O.Data[2].3 +0.3 Stop Measurement Bit
O.Data[2].4 +0.4 Reset Length Calcu-
lation Bit
O.Data[2].5 +0.5 Start Fix Position
Measurement Bit
O.Data[2].6 +0.6 Enable Compensa-
tion Drive Bit
O.Data[2].7 +0.7 Start Compensation
Drive Bit
O.Data[2].8 +1.0 Bit
O.Data[2].9 +1.1 Bit
O.Data[2].10 +1.2 Bit
O.Data[2].11 +1.3 Bit
O.Data[2].12 +1.4 Bit
O.Data[2].13 +1.5 Bit
O.Data[2].14 +1.6 Bit
O.Data[2].15 +1.7 Bit
16 Bit Reserve
O.Data[4] / O.Da-
ta[5] +4.0 Thickness Setpoint REAL
O.Data[6] / O.Da-
ta[7] +8.0 Thickness Upper
Tolerance REAL
O.Data[8] / O.Da-
ta[9] +12.0 Thickness Lower
Tolerance REAL