1
2
1
2
3
3
4
4
5
6
7
5
6
7
1
1
1
1
Sensor tester
ST 300D
Supplied material
•
Sensor’s tester
•
User’s manual
•
Power adapter
•
USB cable
CAT8BST1779202 - USER’S MANUAL - ST 300D ITA/ENG ed. 01/2018
serial
number
items
specifications
remarks
1
Test Type
NPN or PNP
Auto-Detect
2
Output Voltage
4.8 V ~ 5.2 V
5 V output
23.0 V ~ 24.5 V
24 V output
3
Output Current
≤ 0.2 A
5 V output
≤ 0.15 A
24 V output
4
Battery Capacity
2,500 mAh
Li-ion
5
Theoretical
Working Hour
10 h
24 V, 15 mA
6
Charging Time
4.5 h
-
7
Output Voltage for char-
ghing External Device
4.8 V ~ 5.2 V
Power Bank
8
Working Temperature
-10 °C ~ 45 °C
-
9
Weight
145 g
-
10
Size
125.5 x 62 x 22.5
-
11
Other Functions
Silence mode, Sleep mode, Output short-cir-
cuit protection
specifications
outline dimensional drawing (mm)
operating instruction
Connecting the product cables to the tester accordingly a)Three Wired
•
Three wires
M.D. Micro Detectors S.p.A.
Strada S. Caterina 235 - 41122 Modena - Italy
tel. + 39 059 420411
fax + 39 059 253973
www.microdetectors.com
operating instruction or User’s manual.
•
Malfunction that is caused by unpredictable factors (such as change of science and technology)
after the product is delivered from our company.
•
Malfunction that is caused by natural disasters such as fire, earthquake and flood; or abnormal
shaft voltage.
(2)
Any indirect consequences such as devices damage, loss of opportunities, lost profits, or other damage
beyond the scope of warranty (Which is only limited to regulation)
(1)
user’s manual
Please read the manual carefully before using this product. This product should be
applied by someone with a certain level of electrical knowledge. Please read and make
sure that you understand how to operate the product before using it. Please keep this
manual readilly accesible for future references when needed.
warning
Please comply with the warnings indicated before:
•
Please do not exceed maximum rated voltage during usage in order to prevent
tester malfunction or fire.
•
Please do not apply AC power supply to avoid breakage.
•
Please do not subject the product to high temperature to avoid scalding
•
The product contains a non removable Li-ion battery. For the delivery of the
product, follow National and IATA regulations.
precautions
Comply with the warnings indicated below for they are important:
•
Please do not use it in flammable or explosive environments.
•
Please do not use it in environments with water, oil, chemicals or steams.
•
Please do not disassemble, repair or alter this product.
•
Please do not exceed the rated voltage and current.
•
Please do not exceed the rated environment.
•
Please observe electrical polarity when making connections.
•
Please connect load correctly.
•
Please avoid short-circuiting the load.
•
Please do not operate it ,if the housing is broken.
•
When disposing the tester, please treat it as an industrial waste.
warranty
Our products have been tested prior to shipping, however if malfunction occurs, please
contact our offices near you and present the failure in details so that we can provide the
best solution to you.
Warranty Period
The warranty period is 1 year starting from the shipment date .
Scope of warranty
(1)
If malfunction is caused by our company within the warranty period, free service of repairing shall be
offered. The cases listed below do not fall into the scope of warranty.
•
Fail to comply with operating instruction. User’s manual or breech of contracts with our company.
•
Any malfunction that is caused by buyer’s own device or software, instead of our product’s defect
•
Malfunction that is caused by modification or repairmen outside our company.
•
Malfunction that could be avoided by a correct repair or replacing of wearing parts by following
operating instructions
Charging
When BAT light turns Into red, It Indicates that test box needs to be charged. During
chilrging, it remains in red until the sensor tester is fully charged and then it becomes
green.
Sleep Mode
When the sensor tester is on standby for mont then 2 minutes it will automatically enter
into sleep mode to lower power consumption. Meanwhile the BAT light will flicker 2
second Intervals to remind user to switch the power off. When pressing the pulse button
again, the sensor tester will be re-activilted.
Silence Mode
Press and hold Pulse Button for 5 seconds, the NPN light and PNP light will flicker twice
at the same time then the test box will enter into silence mode. When there is an output
from the sensor the corresponding NPN light or PNP light on the sensor tester will switch
on without the beeping sound.
Power bank
Sensor tester can serve as a power bank. Connect the USB charging cable between the
OUT port and the device that needs charging. The sensor tester will begin to charge the
device when the power button is switched on.
Note
•
Please make sure the power is off before connecting the cable.
•
Please make sure the voltage fluctuations are within maximum rated range.
•
When the power is on, please do not apply the device In the first 0.5 s.
•
Please do not subject the device to dust, dirt or vapor.
•
Please do not subject the device to water, oil or organic solvent such 1s diluents.
Pulse
button
Wire
terminal
62
LED
Power
Button
Power
Switch
Charging
Input
Charging
Output
22.5
108
17.5
brown
black
blue
blue
circuit
Power On
: Select 5V or 24V according to product’s requirements
Test:
Switch the power button, the sensor tester will scan the sensor. If there is an output from the
sensor ,the corresponding NPN light or PNP light will be on along with a beeping sound
Pulse:
User can press Pulse button to supply power to the sensor. When pressing Pulse Button,
the light indicator will be on. Supplying output voltage to the red wire terminal . The output voltage is
determined by the power switch
brown
black
blue
brown
ENG
•
Two wires
!
