The model
Das Modell
The Model is designed in 1:200 scale. It can be built as a model for sta/c display or as a working
RC boat. It is set up to enable radio control func/ons (RC), with both pod drives fully func/onal.
As the model is rather small, the model can only be used in very quiet water condi/ons.
Addi/onally, the radar and lights can be set up to work. However, this model is not set up to be
ready to run, it requires refinement and is only suitable for skilled model builders.
Size of the model
scale 1:200
length 27,7 cm
width 4,7 cm
The total model consists of three sets of printed parts:
•
Hull (Strong & Flexible)
•
Details 1 of 2 (Strong & Flexible Polished)
•
Details 2 of 2 (Frosted Detail)
The kit also includes the parts to build a sta/c model including the sha[s and props. Parts
needed for a func/onal RC model are not included.
Das Modell ist in 1:200 angelegt. Es kann als Standmodell oder mit RC Funk/on aufgebaut
werden. Dazu sind beide Azimuth Antriebe funk/onsfähig ausbaubar. Ergänzend können auch
das Radar und die Beleuchtung mit Funk/on versehen werden. Das Modell richtet sich an
fortgeschriDene Modellbauer, und eine gewisse Erfahrungsbasis ist zur Montage notwendig. Es
kann nur in sehr ruhigen Wasserbedingungen betrieben werden. Der Funk/onsausbau ist nur
erfahrenen Modellbauern empfohlen.
Größe des Modells
Maßstab 1:200
Länge 27,7 cm
Breite 4,7 cm
Das Modell besteht aus drei Sets von 3D-Teilen:
•
Rumpf („Hull “) (Strong & Flexible)
•
Beschlagteile 1 von 2 („Details 1 of 2“) (Strong & Flexible Polished)
•
Beschlagteile 2 von 2 („Details 2 of 2“) (Frosted Detail)
Hierin sind auch alle Teile für den Bau eines Standmodells enthalten, einschl. Wellen und
Propeller nicht. Die Teile für den Funk/onsausbau sind nicht eingeschlossen.