Micro Autonomations LLC – Fan Controller v3
13
Document Rev 1.0
Programming the controller
During programming, the fan will turn off to allow the engine to warm up faster. Press and hold
Prg
until the Status LED lights with the color of the sub-menu you wish to enter, then release
Prg
. Holding
Skip
for 4 seconds will exit any programming menu and return the controller to normal operation.
Details about each programming sub-menu can be found on the next page. The Status and Error LEDs
will change colors to indicate the current location in the programming flowchart.
Figure 8 - Programming Flowchart
