background image

Micrel, Inc. 

MIC24055 Evaluation Board 

 

 

February 11, 2013 

10 

Revision 1.0 

 

 

 

 

MICREL, INC.   2180 FORTUNE DRIVE   SAN JOSE, CA  95131   USA 

TEL +1 (408) 944-0800  FAX +1 (408) 474-1000  WEB 

http://www.micrel.com

  

 

Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This 

information is not intended as a warranty and Micrel does not assume responsibility for its use.  Micrel reserves the right to change circuitry, 

specifications and descriptions at any time without notice.  No license, whether express, implied, arising by estoppel or otherwise, to any intellectual 

property rights is granted by this document.  Except as provided in Micrel’s terms and conditions of sale for such products, Micrel assumes no liability 

whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel products including liability or warranties 

relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. 

 

Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product 

can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical 

implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A 
Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser’s own risk and Purchaser agrees to fully 

indemnify Micrel for any damages resulting from such use or sale. 

 

© 2013 Micrel, Incorporated. 

Summary of Contents for MIC24055











Reviews: