KSZ9021RL-EVAL Board User’s Guide
Micrel, Inc.
March 20, 2009
Rev.
1.0
14/24
5.0
MicrelMdioConfig
Software – Installation
The Micrel MDIO Configuration Software (
MicrelMdioConfig
) runs on a PC with the Window XP
Operating System. It communicates to the KSZ9021RL-EVAL board via USB to provide
programming access to the KSZ9021RL device’s PHY registers.
The Micrel software is provided in a Microsoft Windows Installer installation package file (*.msi
file) with the following file name.
MicrelMdioConfig_verx.xx.msi
// where x.xx is the release version number
5.1 MicrelMdioConfig
Installation
Before running the
MicrelMdioConfig
installation, make sure previously installed version of the
MicrelMdioConfig
software has been removed and the USB cable to the KSZ9021RL-EVAL
board is unplugged.
To unpack the
MicrelMdioConfig_verx.xx.msi
file and start the installation, double click on the
file name from Windows Explorer, and proceed with the following steps:
1. At the “
Welcome”
screen, press the
Next>
button.
