Micrel Confidential
6
June 2006
KSZ8862-16 MQL Demo Quick Start Guide
To send TCP packets from the PC to the Demo Board:
Type any 8 characters/numbers into the two blanks under “TCP Send Routine” and click the
“Send” button. The characters/numbers will be displayed on the LCD module of the Demo Board.
To receive TCP packets from the Demo Board on the PC:
Press any one of the three push button switches (S1, S2 and S3) on the Demo Board. The “TCP
Receive Routine” area will display the action from the Demo Board.
To send UDP packets from the PC to the Demo Board:
Use the mouse to slide the bar in “UDP Send” area. The position of the slide bar will be displayed
as a percentage on the LCD module of the Demo Board.
To receive UDP packets from the Demo Board on the PC:
Click the “Start Streaming” button in the “UDP Receive Routine” area, and then adjust POT2 (10K
variable resistor) on the Demo Board. The GUI demo window on the PC will display the current
value.
