KSZ8795 Evaluation Board User’s Guide
Micrel Inc.
Page 16
1/28/2015
5.5 Window SPI Software Tool
This is a powerful tool to access all register. The tool located in the default or assigned folder in the
installation. There is a MicrelSwitchConfigApp.exe file which can be executed directly by clicking
its icon.
Before run the software tool, the SPI jumper setting should follows Table 5 in 4.3 SPI mode section
and USB cable should be plugged in both KSZ8795CLXD-EVAL board and PC/Laptop. After
click its icon, a GUI Window will pop up as follow:
The default is SPI interface to do switch configuration. From the device selection window to select
any devices then press ‘Continue’ button or click ‘Continue’ button directly, the software tool can
detect devices automatically. A control Window will be pop up as follow.
