5
TEL:0755-88602663
501, West Block, Phase II, Tian 'an Innovation Technology Plaza, Futian District, Shenzhen
R60ATR1-Single track module using guide
The mobile test is carried out within the radar detection range, and when
it stops at a random position, the coordinate data finally reported by the
radar is compared with the real position to confirm whether the distance
error value is within a reasonable range to confirm the accuracy of the
distance information.
carry out testing
Move freely within the range for a certain
distance and then stop at any position
Determine whether the error between the
coordinate data finally reported by the
radar and the real distance is within the
specified accuracy range, and within the
specified
accuracy
range,
it
means
"pass"
Example test table format:
Testing
frequency
Radar Coordinate
Information
Compare with real location
information
Whether it is within the
accuracy requirements
pass
the first
time
(x=1, y=1.2)
Yes
pass
9.
Guide to the actual installation steps of the radar
Step 1: Confirm the main activity and stay area of the person, which is
the coverage area of the radar
Step 2: Confirm that the actual installation height of the radar is 2.4m
Step 3: Confirm whether there is an interference source within the radar
detection range , and remove the interference source as much as possible
Step 4: Follow the steps to confirm the final installation location for
normal use
10.Layout Requirements for Antenna and Housing
PCBA: Need to keep the height of the radar patch ≥ 1mm than other devices
Shell structure: It is necessary to maintain a distance of 3mm between the
radar antenna surface and the shell surface
Shell detection surface: non-metallic shell, need to be straight, avoid
curved surface, affect the performance of the entire scanning area.
