6. Functions Explanation
a. Voice Monitor:
* Set center number by this sms command:
CENTER,A,center number#
* Set center number by this sms command:
CENTER,A,center number#
* Send this sms command from the center number:
RELAY,A#
* Switch the tracker to voice monitor mode
by this sms command:
MONITOR#
b.
V
ibration
Alert:
This vibration alert function just work under stationary
status. How to use this function:
c. Cut Off Fuel/Resume Fuel
*
Enable the device to enter into arm mode by this
sms command:
ARM#
*
Conifgure the alarm ways by this sms command:
SENALM,[A][,M]#
A=ON/OFF, default: OFF;
M=0/1/2, way of alarming,
0 :GPRS only, 1: SMS+GPRS, 2: GPRS+SMS+phone call, default:1
A=0/1/2; (0: Resume Fuel; 1: Cut Off Fuel Immediately;
2: Cut Off Fuel Safely)
*
Configure SOS numbers for the tracker by this sms command:
SOS,A,1st number,2nd number,3rd number#
3 SOS numbers supports at the most
* Keep the device under stationary status more than 5min to let it enter into sleep arm mode;
* V
ibrate the device then the tracker will send the vibration alarm messages
*
Dial the sim number of the tracker from the center
numbe
r, then the tracker will pick up the call automatically
and you will can remote monitor the voice around it.
For example:
CENTER,A,12345678910#
SET CENTER NUMBER OK
SET MONITOR MODE OK
MV501G
For example:
SOS,A,12345678910#
SET SOS NUMBER OK
ARM#
SET ARM MODE OK
SENALM,ON,1#
SET VIBRATE ALARM OK
MV501G
For example:
MONITOR#
CENTER,A,center12345678910#
SET CENTER NUMBER OK
RELAY,1#
CUT OFF FUEL OK
MV501G
Please follow with the quick user guide carefully!
