Functions
Command Format
Explanation
Parameter Inquiry
Latitude&Longitude
Inquiry
Map URL Inquiry
Check All Alarms Status
PARAM#
Check ID,IMEI,APN, IP,PORT,TIMER,Center
number,SOS number,Time Zone
WHERE#
URL#
ALARM#
Status Inquiry
STATUS#
BATTERY: XX% (Built-in Battery Power Percent)
NET: CLOSED (No Network) FAILED (Connecting
Network or Failure) SUCCESS(Connected
to Network),
NONE (No GSM Signal)
HIGH / MED / LOW (Signal Strength)
GPS: CLOSED (GPS Module Closed) FIXED,
N(Positioned and satellite number) UNFIX,
0 (Not Positioned yet)
TEMPERATURE: 30°C(the temperature around
the device)
ANGLE: 20 (the data upload angle)
SENSOR: ON/OFF (the status of the shake
sensor)
LEVEL: 3 (the sensitivity of the shake sensor)
STATE: ARM/DISARM (the defense status of
the device)
Time Zone Setting
Set the angle upload
ANGLEREP,[X][,A][,B]#
ANGLEREP,OFF#
GMT,Time zone orientation,Whole
Time Zone[,Half Time Zone]#
X=ON/OFF,default:ON; A=5~180 degrees,diversion
angle degree, default: 30 degrees;B=2~5 seconds,
detecting time, default: 3 seconds.
GMT,E,8# (if no half time zone)
GMT,W,9,30# (if has half time zone)
NOTE: Parameter : E / W; 0 ~ 12; 0/15/30/45
Add SOS Administr-
ator Number
Delete SOS
Administrator Number
Add Center Number
SOS,A,1st number,2nd number,3rd
number#
SOS,D,1st number,2nd number,3rd
number# or SOS,D,1,2,3#
CENTER,A,center number#
CENTER,A,13800138000#
NOTE: Only center number can be used
for cutting off fuel.
Set 3 numbers at a time:
SOS,A,13800138000,1380013800 1,13800138002#
Set the first numberseparately:
SOS,A,13800138000#
Set the second number separately:
SOS,A,,13800138001#
Means to set 3rd number separately:
SOS,A,,,13800138002#
Directly delete the number: SOS,D,13800138000#
Delete 1st number: SOS,D,1#
Delete 2nd number: SOS,D,2#
Delete the 2nd and 3rd number: SOS,D,2,3#
Query current mileage
A=ON/OFF, On/Off mileage calculation,
default: Off
B=0~999999, Mileage initial value , unit: km ;
default: 0, mileage return to zero
Mileage Statistics
MILEAGE,[A],[B]#
MILEAGE#