MICO audient Operation Manual Download Page 6

6

Operation Manual

© aud

ient 7/2007

6

Operation Manual

© aud

ient 7/2007

Unpacking

your  MiCO  has  been  carefully  and 
meticulously  tested  and  inspected 
before despatch.

Please  check  for  any  signs  of  transit 
damage. If any signs of mishandling are 
found please notify the carrier and your 
dealer immediately.

your  MiCO  packaging  should  contain  a 
MiCO unit, an external PSU, along with 
this manual. If the manual is missing you 
won’t be reading this, so you’ll be none 
the wiser.

Mains Power Supply

MiCO  is  despatched  with  an  external 
PSU which will accept voltages between 
100-40V.  MiCO  itself  requires  a  DC 
input voltage between 10-16V to operate 
correctly.

Mechanical Installation

your  MiCO’s  compact  form  factor 
allows the unit to be slipped into a bag 
for location recording, or secured in the 
optional 1U 19” rack tray. Up to  MiCOs 
can be mounted in a 1U rack space.

Unpacking

your  MiCO  has  been  carefully  and 
meticulously  tested  and  inspected 
before despatch.

Please  check  for  any  signs  of  transit 
damage. If any signs of mishandling are 
found please notify the carrier and your 
dealer immediately.

your  MiCO  packaging  should  contain  a 
MiCO unit, an external PSU, along with 
this manual. If the manual is missing you 
won’t be reading this, so you’ll be none 
the wiser.

Mains Power Supply

MiCO  is  despatched  with  an  external 
PSU which will accept voltages between 
100-40V.  MiCO  itself  requires  a  DC 
input voltage between 10-16V to operate 
correctly.

Mechanical Installation

your  MiCO’s  compact  form  factor 
allows the unit to be slipped into a bag 
for location recording, or secured in the 
optional 1U 19” rack tray. Up to  MiCOs 
can be mounted in a 1U rack space.

Summary of Contents for audient

















Reviews: