WARNING:
Never push objects of any kind into this product through the ventilation openings in the case. Doing so may
be dangerous and damage your light.
NOTICE:
Failure to follow these handling instructions could result in damage to your Aqua mini & Pro or other property.
Important Handling Information
Carrying your Aqua mini & Pro before you move your Aqua mini & Pro, shut it down and disconnect all cables and cords connected to it.
Using power cord Never force a connector into a port. Don't put the power cord into your tank when it connected.
When you Setup your Aqua mini & Pro please make sure that there are no loose items (such as paper, metal or other) that could accidentally
get inside the Aqua mini & Pro through vent openings or get stuck inside a port.
Mount your power supply where it won’t get wet. Include a “drip loop” - a tied loop of cord hanging down below the level of the electrical outlet.
That way, if water happens to run down the cord from the tank, it will drip off onto the floor rather than into the outlet. Drip Loops should always
be used to help prevent water from traveling along the cord and coming into contact with an electrical outlet. Drip loops must always be below
the level of the outlet. If the plug or outlet does get wet, DO NOT TOUCH the cord.
Storing your Aqua mini & Pro If you are going to store your Aqua mini & Pro for an extended period of time, keep it in a cool location (ideally, 71°
F or 22° C).When cleaning the outside of your Aqua mini & Pro, first shut down your Aqua mini & Pro and unplug the power cord. Then use a
damp, soft, lint-free cloth to clean the lamp exterior. Avoid getting moisture in any openings. Do not spray liquid directly on the lamp. Do not
use aerosol sprays, solvents, or abrasives that might damage the finish.
MicMol and the Environment
Information
MicMol. recognizes its responsibility to minimize the environmental impact of its operations and products.