Michigan Welding CART11, Operating Instructions

Page: 2 / 4

Description
The Heavy Duty Welding Trolley is designed to hold small welders,
welding tools, accessories, consumables, gas tanks etc. Equipped with
four rollers, it is very convenient to move. It is an ideal for use in the
house, garden and garage.
Attention
Only use trolley on a hard, flat surface.
Assembly
Check all pieces are present on the parts list below and then assemble
the cart according to the image on the next page.
Important: Do not tighten off all screws immediately. After all the screws
are in position ensure the back panel is vertical with the bottom and
that all components are lining up correctly. Then fully tighten all screws.
Item Specification
Pack Dimension (LxWxH)
720 x 325 x 120mm
Product Dimension (LxWxH) 690 x 402 x 720mm
Load weight limit 50kg
Pack weight 13kg
Parts List
No. Description Specification Qty.
1 First floor CART-11.7 1
2 Torch hook 8HG.125.207 2
3 Second floor CART-11.4 1
4 Left support CART-11.5 1
5 Bottom floor CART-11.1 1
6 Front castor φ 63 2
7 Hex-nut M6 34
8 Right support CART-11.6 1
9 Hex-bolt M6*12 34
10 Cotter pin 2.5*25 2
11 Flat washer
φ
12 4
12 Rubber wheel
φ
150 2
13 Axle support 8HG.271.008 2
14 Axle CART-11.2 1
15 Back panel CART-11.3 1
16 Iron chain 4mm*0.8m 2