![background image](http://html.mh-extra.com/html/michigan-pneumatic-tool/mp-hs-1sc/mp-hs-1sc_manual_1784716003.webp)
3
Safety
General Product Safety
Information
• Failure to observe the following
warnings and failure to avoid
these potentially hazardous
situations could result in death or
serious injury.
• Read and understand this
and all other supplied manuals
before installing, operating
repairing, maintaining, changing
accessories or working near
this product.
• Only qualified and trained
operators should install, adjust
or use the tool.
• It is your responsibility to
make this safety information
available to others that will
operate this product.
• The warnings given in this and
all other supplied manuals are for
identifying hazards that are fore-
seeable in the general use of
this tool. However, specific
applications may create other
hazards that must be identified
and reduced before using the tool.
• Always install, operate, inspect
and maintain this product in
accordance with all applicable
standards and regulations (local,
state, country, federal, etc.)
Operate and maintain this tool
as recommended in this manual
to prevent an unnecessary
increase in noise, vibration, dust
and fume hazards.
WARNING
Product Safety
Information – When
Placing the Tool in
Service
• Before beginning a job the
operator or their employer must
assess all potential risks of
using this product to do the job.
These risks must be eliminated
or appropriate controls must be
implemented to reduce the risk
to a safe level.
• Always use clean, dry air at 90
psig (6.2 bar/620 kPa) maximum
air pressure at the inlet, unless a
higher pressure rating is specified
on the tool. Exceeding the
maximum rated pressure (PMAX)
shown on the tool may result in
hazardous situations including
excessive speed, rupture, or
incorrect output torque or force.
• Ensure an accessible
emergency shut off valve has
been installed in the air supply
line, and make others aware of
its location.
• Install a properly sized Safety
Air Fuse upstream of hose and
use an anti-whip device across
any hose coupling without
Safety
Summary of Contents for MP-HS-1SC
Page 15: ...15 Notes ...