Copyright © 2009-2016 Micca All rights reserved.
160809
5.7 Motion Sensor (M123A-M and M153A-M Only)
The photo frame is equipped with an infrared motion sensor and will automatically turn
on when nearby motion is detected, and turn off when the timer expires without nearby
motion. The unique instant-on capability
resumes slideshow, music, or video
playback within 1 second of motion
detection. The sensor is located on the
lower left hand corner of the photo frame
and should not be blocked by any objects
including transparent glass.
5.7.1 Motion Sensor Settings
By default the motion sensor timer is
enabled and set to 30 minutes. The timer
can be changed to a more suitable value in
the settings menu, or disabled completely.
Please see Section 6.5 for motion sensor
setting options.
5.7.2 Motion Sensor Override
When the motion sensor is enabled, using the remote control to turn off the photo frame
will cause the photo frame to remain off even when there is nearby motion. This is
useful as a temporary override for when you do not want the photo frame to turn on due
to motion. To resume normal operations, use the remote to turn the photo frame on.
5.7.3 Motion Sensor Range
The range of the motion sensor is approximately 15 feet depending on other
environmental variables. The trigger angle is approximately 45 degrees to either side of
the center line.