5
• Before calibration, move away from large metal objects (open field is best)
• Connect to WiFi interface per instructions in RedEdge-M User Manual
• Go to the Settings tab in the RedEdge-M web interface
• Click on “DLS Configuration”
• In the DLS Configuration section, click “Calibrate DLS Mag”
• Use the heading on the WiFi home screen or magnetometer calibration complete screen
• Verify magnetic heading using WiFi home screen
• OK if variability is +/- 5°, redo if outside this window
Magnetometer Calibration Instructions:
Go to
micasense.com/dls
for DLS Mag Calibration video
Figure 2
GPS
6-pin to 6-pin
connector
GPS Module
In addition to GPS information,
this module is needed to obtain
heading (may be substituted
out with MAVLINK or HTTP
API injected attitude).
Summary of Contents for RedEdge-M
Page 1: ...Professional Multispectral Camera Kit by...
Page 11: ...Notes 11...
