PAGE 2
What’s Required?
#1 Phillips Screwdriver
2 mm hex wrench
Cutting tool - such as scissors or diagonal cutter
1.5 mm hex wrench
Let’s get started!
Warning: Installation of this kit into a Inspire 1 drone should be done by an experienced person,
in adherence with all recommendations and guidelines of the Inspire 1 manufacturer. Before
assembling this kit, ensure the Inspire 1 is not powered, has the battery removed, and the rotor
blades removed. Failure to follow these instructions can result in injury and/or damage to the
Inspire 1 or RedEdge-M.
Assembling and attaching the Quick Mount
1. Locate the four M3 x 8 mm flat-head screws and RedEdge-M mount.
2. Peel off the brown protective paper from the RedEdge-M mount
3. Using the countersink screw holes, attach the mount to the back of the RedEdge-M.
4. Locate the two M2 x 6 mm screws and the Go-Pro mount adapter
5. Attach the Go-Pro mount adapter to the RedEdge-M mount.
6. Locate the QuickConnect mount and remove the thumbscrew.
7. Attach the Go-Pro mount adapter of the assembled RedEdge-M mount to the Quick Mount and secure
it with the thumbscrew.
8. Connect the RedEdge-M Quick Mount cable to the RedEdge-M “PWR/TRG” port.
Mounting bracket attached to RedEdge-M
RedEdge-M mount attached to Quick-
Connect adapter
Fully connected QuickMount
