OPERATION
Check the heater is correctly fitted with the base stands
Connect the supply plug to a suitable 230V ~ 50Hz outlet and switch on
Select the desired thermostat setting
Select the desired heat setting
•
Heat setting I gives 800watts of power
•
Heat setting II gives 1200watts of power
•
Both heat settings combined gives 2000watts of power
The power ON lights will glow when the heating cycle is on.
Timer Operation
Warning! Rotate the timer clockwise only do not attempt to rotate it anti clockwise.
The timer is a 24hour timer, 1 being 1am, 12 being 12 mid day and 24 being midnight.
The timer has a small switch on it that controls the heater also. It has 3 options
I
- Always ON
0
– Always Off
© -
Timer function
The timer is fitted with 96 small plastic pins that represent 15minute intervals. Push the pins to the outer
position to set the ON time. Press the pins to the inner position to set the OFF time.
Set the current time to the indicator mark
►
by rotating the timer clockwise.
Set the timer switch to timer function. When the relevant time is reached the heater will switch on and off.
SAFETY
To avoid any risk of risk of fire, shock hazard or personal injury, follow these guidelines.
Warning! When not in use or before cleaning, always disconnect the appliance from the mains supply
Warning! Do not splash with liquids. Do not allow the appliance supply plug and cord to get wet or be
immersed in any liquid.
Warning! Disconnect from the mains supply and switch off when not in use.
