•
Warning! The feet must be connected to the bottom of the heater with the control panel at the top.
Failure to do this will result in serious damage to the heater
OPERATION
Check the heater is correctly fitted with the base stands
Connect the supply plug to a suitable 230V ~ 50Hz outlet and switch on
Select the desired thermostat setting
Select the desired heat setting
•
Heat setting I gives 600watts of power
•
Heat setting II gives 900watts of power
•
Both heat settings combined gives 1500watts of power
The power ON lights will glow when the heating cycle is on.
SAFETY
To avoid any risk of risk of fire, shock hazard or personal injury, follow these guidelines.
Warning! When not in use or before cleaning, always disconnect the appliance from the mains supply
Warning! Do not splash with liquids. Do not allow the appliance supply plug and cord to get wet or be
immersed in any liquid.
Warning! Disconnect from the mains supply and switch off when not in use.
Warning! In order to avoid overheating, do not cover the heater.
Warning! Children
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of knowledge, unless they have been given supervision or instruction concerning safe use
of the appliance by a person responsible for their safety. Young children must be supervised to ensure that
they do not play with the appliance.