•
Place the oil cooking pan into the stainless base
•
Slide the main electrical control assembly into the plastic guide rails on the side of the unit. Ensure it is
fitted correctly. Refer product description illustration.
NOTE. The appliance will not work unless the control assembly is fitted correctly to the base unit. It
has a safety switch (part # 16) which is activated when the control assembly is correctly fitted to
the base unit.
•
Fit the handle to the deep fryer basket.
1. Hold the handle grip and squeeze the two chrome bars together
2. Slide the two (squeezed) bars of the handle down through the basket support bracket; locate the
two 90° angle bar ends into the basket support hole s and release. The handle should now be
attached to the basket.
•
Place the deep fryer basket on the side of the pan using the support brackets.
The appliance is now ready for use.
The main electrical control has a thermostat to control the heating elements and oil temperature.
A RED “Power On” LED indicates the appliance is ready and power is on.
A GREEN “temperature reached” LED indicates that the oil has reached the desired temperature.
The assembly is fitted with a safety switch to ensure the unit is assembled correctly. The appliance will not
function without it being assembled correctly. It is supplied through an approved supply cord and plug.
Warning! This part of the appliance must not be immersed.
Warning! This appliance is only suitable for use with cooking oil or liquid fat. It is not suitable for use with solid
fat that may contain water. When hot this may create a hazard with hot fats being expelled.
Never put other substances like water in the pan.
Assembly
Electric Control
Cooking Oils
