18
OPERATING INSTRUCTIONS
NOTE
: When switched on for the first time a slight odor may be
for a few
minutes. This is
and occurs with most appliances as slight traces of dust or
may have collected during manufacture
Power Light
Low Power
High Power
Setting Adjustment (up)
Setting Adjustment (down)
Temperature Select
Timer Select
Standby
Power Switch
•
not wall
fix castors to base supports (refer to Portable Assembly on
page 3), and place the heater on a level surface in a stable upright position.
•
Ensure the Power Switch is OFF.
•
Unwind the power cord and plug your heater into a power socket (refer to Posi-
tioning of the Heater on page 3).
Ensure the voltage on the specification plate is the same as in your home and the
power cord is lying safely on the ground.
•
Turn the heater ON by pressing the power switch, the digital display will flash brief-
ly and the power light ( ) will light up.
•
Press the standby button to switch the heater fully ON. The digital display will
show the room
and the power setting symbols will light up (it defaults to
HIGH power). The heater defaults to a
setting of 25°C.
•
To switch the heater OFF, reverse the above procedure. Turn the power OFF at the
wall to fully switch off the heater.
Power Selection
•
To select the LOW power option, press the setting adjustment button (
-
), only the
small blue ‘low power’ light will light up on the digital display.
