Function Description
Set the charging current
Automatically set the charging current
Intelligent temperature control function
Input power
Put the battery into any channel, the charger will
automatically select the most suitable current
charge according to the battery characteristics.
The maximum charge current is 3.0A and the
minimum charge current is 0.1A.
If during a charging process a battery tempera-
ture reaches more than 60
℃
, the charger will
reduce the charging current in order to prevent
damage to the battery.
If battery temperature reaches temperature more
than 70
℃
, the charger will stop charging the
battery and prompt “ ” .
The charger is suitable with DC12V / 3A stan-
dard power supply, it is highly recommended to
use the original standard power supply adapter.
When using a non-standard power supply
that cannot provide the charger with sufficient
current (3A).
The charger will automatically adapt to the
power supply, and the maximum output
power of 80% of the charger power supply.
“ ”
Flickering:
The data indicates the accumulated capacity
volume of the battery which was charged by the
charger.
“ ”
Constant shinning:
The data indicates the battery’ s total capacity (the
total capacity of the battery which was calculated
according to the cumulative capacity by charger).
Short press key to switch the channel (C1 / C2)
information display.
Press the button to turn on the LCD backlight,
if there is no operation, LCD backlight will gradually
darken in 1 minute.
1. Put the battery in any channel, the charger starts
to detect battery-related data and display it on
the LCD screen. After 5 seconds, the most
suitable current charge (maximum 3.0A, minimum
0.1A) is automatically selected according to the
battery characteristics.
2. “ ” and “ ” flashing, The charger is charging.
3. When the battery is full “ ” will show and
show “ ” , Battery percentage show
“ ”
.
1. Long press key, The current ( )
Flashing,
2. Press the button briefly to select the
current.
3. To exit current selection mode wait 3 seconds,
or long press the key.
*Automatically:
The current symbol " " flash, expressed as
automatic setting. The maximum charge current is
3.0A and the minimum is 0.1A.
After battery was placed in one of the charging
slots, the battery percentage will display automati-
cally.
Li-ion
Ni-MH / Ni-Cd
The charging
current range
(unit: A)
0.1 / 0.2 / 0.3 / 0.5 / 0.8 /
1.0 / 1.5 / 2.0 / 2.5 / 3.0 /
Automatically
0.1 / 0.2 / 0.3 / 0.4 / 0.5 /
0.6 / 0.7 / 0.8 / 0.9 / 1.0 /
Automatically
