MIB Commuter, Owner'S Manual

Page: 15 / 18

13
Alright! Let’s get to setting up your brand new MiB E-Bike™ Please look online for video
instructions on how to set assemble you MiB E-
Bike™. Alternatively please see below
for written instructions on setting up your E-
Bike™. If you are not fully confident in
assembling your E-Bike we recommend strongly that you contact a local bicycle
specialist.
Please note that the written instructions below are for all MiB E-
Bikes™ in our range
and therefore there may be some sections that may not relate to your specific model. If
you are unsure at any point in what do please feel free to contact us.
Take a look and make sure you have all of the following items in your box:
- Bicycle (with both tyres, motor, chain etc.)
- Battery
- Charger
- Pedals
- Lights
- Quick release mechanism for the front wheel (if you have MiB Urban Scrambler)
- Tool Kit
Step by Step Guide
1. Remove bicycle from box and remove all packaging including bubble wrap and foam
coverings carefully.
2. Attaching your front wheel (please skip to step6 if you have a MiB Commuter, Cruise or
Discovery) Locate your quick release mechanism unscrew the end cap removing the cap
and spring. Then put this through middle of your front wheel hub (See Image) then put
the spring back on and loosely screw the cap back on.
3. Align the front wheel with the front forks of the E-Bike making sure that brake disc is
aligned with the brake caliper. The bike should now rest comfortably on the front
wheel.
4. Once the wheel is on hold then end cap with your fingers and then rotate the quick
release lever clockwise until you feel a slight resistance, then push the quick release