background image

   

11   

5.0

 

Appendix   
   

5.1   Warranty   Registration   
   

To  be  eligible  for  the  three  (3)  year  limited  warranty,  the  original  purchaser  must 
register  the  MIAD  Audio  product(s)  within 

thirty  (30)  days 

of  date  of  purchase.  

Register online at 

www.miad.eu/ProductRegistration

  

   
   
5.2   Product   Warranty      
   

During the first three (3) years from the date of the original purchase, this product is 
warranted  to  be  free  from  defects  in  materials  and  workmanship  under  normal  use, 
service  and  maintenance.  This  warranty  is  limited  to  failures  during  normal  use, 
which are due to defects in material or workmanship. If any defects are found in the 
materials  or  workmanship,  or  if  the  product  fails  to  function  properly  during  the 
applicable  warranty  period,  MIAD  Audio,  at  its  option,  will  repair  or  replace  the 
product. 
 
This warranty applies to the original purchaser and is subject to the following terms 
and conditions: 
 

1.

 

 The  warranty  only  applies  to  MIAD  Audio  products  purchased  directly  from 

MIAD Audio or from authorised MIAD Audio dealers. The authorised dealers of 
MIAD Audio products are listed online at 

www.miad.eu/Dealers

 

 

2.

 

 The  warranty  does  not  cover  any  of  the  following:  damage  caused  by  the  user; 

spillages  or  moisture;  neglect,  abuse  or  misuse,  including  but  not  limited  to  the 
failure to use the MIAD Audio product for its normal purpose in accordance with 
the  manufacturer's  instructions  for  usage,  failure  to  properly  maintain  the  MIAD 
Audio  product  in  accordance  with  the  manufacturer's  instructions,  and/or  the 
failure  to  use  the  MIAD  Audio  product  in  accordance  with  the  manufacturer's 
specifications; use of product with incompatible or faulty equipment; unauthorised 
modifications;  repairs  conducted  by  unauthorised  persons  or  service  centres;  the 
model  and/or  serial  number  being  altered,  removed  or  made  illegible;  damage 
resulting  from  improper  packing  or  mishandling  by  a  shipper;  accidents;  acts  of 
God; Cosmetic defects, such as paint finish, and general wear and tear or any cause 
beyond the control of MIAD Audio.  

 

3.

 

 If  the  equipment  requires  warranty  repair,  return  authorization  must  be  obtained 

from MIAD Audio prior to shipment. Equipment should not be shipped until return 
authorization and proper shipping address is obtained from MIAD Audio.  

 

4.

 

 Any  products  returned  MIAD  Audio  for  repair  should  be  in  their  original 

packaging  and  they  should  include:  (1)  complete  description  of  the  problem;  (2) 
name, address, phone number and e-mail address; (3) receipt of original purchase; 
(4) power supply and all accessories and cables.  

 

Summary of Contents for LCPQ 4040
















Reviews: