Prodomus
19
flashing. To change the time just push the arrow buttons (
up,
down).
When pushing the TIMER button a second time, the digits for minutes are active and flashing.
To change also push the arrow buttons. To save the adjusted time, just wait some seconds without
pushing any button.
TIMER function is active as long as the LED control lamp above the clock symbol is illuminated. To
deactivate/delete the timer function, push the TIMER button several times, till the control lamp
above switches off. Now timer is off. The display will now indicate the last value of power or
temperature level which has been adjusted before (e. g. 10 or 180). When the adjusted time has
elapsed, an acoustic signal will sound and the appliance will change into standby mode.
1
= LCD display shows the mode of adjustment
2
= Selection button for for changing into higher level of power, time, temperature (
)
3
= Selection button for for changing into lower level of power, time, temperature (
)
4
=
Switch for adjustment of the power function, levels 1-10 (STUFE)
5
= Switch for adjustment of the temperature function in °C (TEMP)
6
= Adjustment of the time function (TIMER)
7
= ON/OFF switch
8
= LED indicators (STUFE = Power, TEMP, TIMER, ON/OFF)
After finishing the cooking or keeping warm process always switch off the device and unplug. All
functions can be adjusted manually by pressing the corresponding buttons. We recommend to follow the
instructions in chapter “Operating of the device”. Do not use the appliance if it shows any sign of damage
or malfunction. Please contact the customer service (see “Warranty claims”) in such case. Do not put
empty cook ware on the appliance and do not leave cookware too long on the appliance to avoid comp-
letely boiling away of the liquid. Overheating of cookware will activate the boil dry protection of the device.
Note: If the unit displays the error code E2, it has been overheated by too hot cookware.
In this case turn off and unplug the appliance and let it cool down completely.
Safety functions
All error codes you will find in the table below. Please see "safety functions" on page 15 and 16 also.
In errors cases E-1-5 for safety reason unplug the appliance and let it cool down.
Attention: After use and when the cooking or warming process is finished always switch OFF
and unplug the appliance.
Symptom
Possible cause and corrective action
Display shows
E-0
No pot on heating plateԁ
No pot that suits, pot bottom surface less than 10 cm
Put the pot correctly on the middle of the plate
Display shows
E-1
High temperature protection; unplug an let the unit cool down
Open circuit protection or fail function of temperature sensor,
short circuit protection; unplug and apply to a qualified electrician
Display shows
E-2
Pot bottom temperature too high; unplug an let the unit cool down
Stove temperature sensor open, fail function or short circuit; unplug
and apply to a qualified electrician
Display shows
E-3
Voltage exceeded 270 V, use it after voltage returned to normal
Display shows
E-4
Voltage lower than 140 V, use it after voltage returned to normal
Display shows
E-5
Current is over or under, use it after voltage returned to normal
1
2
4 5 6 7
<
<
<
<
<
<
<
<
3
\
\
\
1
2
4 5 6 7
<
<
<
<
<
<
<
<
3
\
\
\
8
8
