Prodomus
27
C
C
l
l
e
e
a
a
n
n
i
i
n
n
g
g
t
t
h
h
e
e
b
b
l
l
a
a
d
d
e
e
s
s
Hold the hair clipper in front of you with clipper blade in front upwards.
Press the blade gently backwards with your thumb in order to remove
the clipper blade from the housing. The blade in its holder will be
removed from the hair clipper.
Use the cleaning brush to remove any hair remaining between
the blades and from the open head. Then place 1 or 2 drops of the
provided oil onto the blade for lubrication. Gently replace the blade
holder and ensure that it is engaged properly.
Switch the appliance on for a couple of seconds so that the oil can
be distributed evenly. Use only the provided oil for lubrication.
The clipper blades should be oiled regularly (after each use) to
keep them always lubricated. Do not use hair oil, grease or any
oil mixed with kerosene or other solvents,
solvents will evaporate
and will leave thick and sticky oil which might cause the blades moving
slower or even block.
Remains of grease from the hair may also lead to less function.
If this happens, remove the blade holder as described above, clean
the blade with the small brush (4), then wipe the blade briefly with
a cloth dipped into alcohol. Dry the blade afterwards with a cloth.
T
T
e
e
c
c
h
h
n
n
i
i
c
c
a
a
l
l
d
d
a
a
t
t
a
a
Plug-in charger:
Yuyao City Simen Town Xinye Electric Factory
Model: XY-G350330
Input 230V
~
50Hz
Output 3V 300mA
The Plug-in charger is tested according to GS regulations and
correspond to CE directives.
Hair and beard clipper:
Ni – H 1.2V 600mAH
