14
Rinsing the Top Fan Filter
* Recommended to rinse at least once a
month.
1. Turn the top fan filter counterclockwise to
the unlocked position and remove it from
the vacuum.
2. Rinse the inside of the top filter under
the tap. Rotate the filter while rinsing it
to make sure that all the dust in the filter
gaps is rinsed out. Tap the filter several
times against the sink to remove all the
remaining dust before rinsing it.
3. Repeat this process four to five times until
the filter is clean.
4. To thoroughly dry the filter, keep it in a
ventilated or cool place for at least 24
hours after cleaning.
24
5. After drying, reinstall the filter by aligning
it with the unlocked position and turning it
clockwise until it locks into place.
Cleaning the Roller
Please follow the instructions below to check
and clean the roller regularly to maintain
its performance. Before removing the roller,
make sure that the brush head has been
detached from the vacuum to avoid personal
injuries caused by accidentally turning on
the vacuum.
Caution: The bed attachment roller must be
removed and cleaned separately.
The bed attachment and floor attachment
contain electrical components, and the floor
attachment roller contains bearings, so do
not clean these parts with water.
This version is for private use only and should not be distributed.
