Mi DCL01CM, User Manual

Page: 8 / 26

01 45
90
00 00
PAUSE
Note: The timer function can still be used when the heat is
off. When the countdown timer ends, the alarm will sound,
and the device enters standby mode. The timer can only be
set under a specific cooking mode when the heat is on.
Note: The longest countdown time is 4 hours. The time is
displayed in "hours" and "minutes". When the timer ends,
the device turns the heat off and enters standby mode
automatically.
Note: After the device is paused, it will automatically enter
sleep mode after 10 minutes if there is no subsequent opera-
tion.
Adjust the power
1. Disassembling 2. Installing
3. Cleaning the cooktop 4. Cleaning the air inlet/outlet
Pause the device
Timer Mode
When the heat is on, turn the control knob to
adjust the power. The power level is between
0-99.
It is important to turn the power off when the induction cooker is no longer in use. To
avoid scalding, allow the device to cool down before performing the following opera-
tions.
Pull out the silicone gasket from both
sides of the induction cooker.
Align the silicone gasket with the groove
beneath the cooktop, and insert into it.
To ensure better cooking and cleaner
cooktop, you're recommended to use a
soft wet cloth with a mild detergent to
wipe the cooktop after cooking.
Use a soft brush or mini vacuum cleaner
to remove dust from the air inlet and
outlet, or gently wipe them with a soft
cloth. It is recommended to clean every 6
months.
When the heat is on, press the control knob to
pause heating. Press again to restart heating.
1 . Before using the "TIMER", confirm the
current mode is correct. After selecting the
mode, press the "TIMER" button to enter timer
mode.
2. Turn the control knob clockwise to adjust the
countdown time, and press to confirm. Turn the
knob slowly to adjust the time in 1-minute
increment. Turn it quickly to adjust the time in
10-minute increments.
06
Daily Maintenance Operating Instructions