17
81D3032
NBST27 Unvented Gas Log Set
LG653
NBST Log 4
Log #4
LG653
Figure 22 -
Place Log #4
LG651
NBST log 2
Log #2
Figure 20 -
Place Log #2
LG651
2. Place log #2 on left grate tines by
aligning the ‘V’ notches in the log
with grate tines. The groove on the
bottom of the log should be firmly
seated on the grate bar.
Figure 20
LOG PLACEMENT
LG650
NBST log 1
Log 1
Control
Valve
LG650
LOG PLACEMENT
Begin on Side A, valve on left as
you face the fireplace.
1. Place log #1 on burner by
aligning two (2) holes on bot-
tom of log with two (2) pins
on burner. The tallest part of
the log is on the valve side of
burner. Gently push log down
until it comes in contact with
burner surface.
Figure 19
Figure 19 -
Place Log #1
LG652
NBST Log 3
Log #3
LG652
Figure 21 -
Place Log #3
3. Place log #3 on farthest right grate
tine by aligning the ‘V’ notch in log with
grate tine. The groove in the bottom of
the log should sit on the filler bracket
surrounding the pilot assembly.
Figure
21
4. Place log #4 by aligning the ‘V’ notch
on bottom of log with horizontal grate
bar between tines as shown in
Figure
22
. Place the rectangular notch on bot-
tom of log onto the matching rectangu-
lar protrusion on log #1.
Figure 22