www.mhpgrills.com
| 7
OP BASE
CAST ALUMINUM BASE
Attach the Column to the Base
•
Attaching the column to the base will
be easier to handle by laying the column
face down and matching the holes on
the column lip to the holes on the base.
•
On the left and right sides of the
column—Locate the two pre-drilled
holes on either side of the column lip.
Slide a 1/4 x 20" x 3/4" Hex bolt down
through a rectangular washer to
underside of the base through the
pre-drilled hole on the column and
secure using a Kep Nut.
•
On the front side of the column—
Locate the two pre-drilled holes on the
front side of the column lip. Slide a 1/4
x 20" x 3/4" Hex bolt down through a
round washer to underside of the base
through the pre-drilled hole on the
column and secure using a Kep Nut.
•
Use a 7/16" wrench to hold the Kep Nut
while using a second adjustable wrench
to tighten the bolt. There are a total
of six pre-drilled holes which should
be secured.
IMPORTANT: The large rectangular washers are
used on the top of the pedestal column lip. The round
washers and Kep Nuts are used under the base. Tighten
securely and stand unit upright.
HEX BOLT
HEX BOLT
RECTANGULAR
WASHER
ROUND WASHER
PART NEEDED
3/8" FLARE COUPLING
ADDITIONAL ITEMS NEEDED FOR
PATIO BASE INSTALLATION
(Not Included)
LAG BOLTS (2)
TOOLS NEEDED
ADJUSTABLE
WRENCH
7/16" OPEN
END WRENCH
GGCTSS
FLEX TUBE
ATTACH THE BASE TO THE COLUMN (OP BASE)
STEP 2C-OP
Included with
natural gas
bases only
SCAN THE
QR CODE FOR
ASSEMBLY VIDEO
HEX BOLT
ROUND
WASHER
HARDWARE NEEDED
GGM4
KEP NUTS
(QTY. 6)
GGM15
RECTANGULAR WASHERS
(QTY. 4)
GGM6
1/4 X 20" X 3/4"
HEX BOLTS (QTY. 6)
GGM11
STAINLESS STEEL
WASHERS (QTY. 10)