MHP JNR Assembly Manual Download Page 2

2

DANGER: IF YOU SMELL GAS

 

1.

  Shut off the main gas supply to the grill

2.

  Extinguish any open flame

3.

  Open lid

4.

  If odor continues, keep away from the grill and 

immediately call your gas supplier or your fire department. 

Failure to follow these instructions could result 
in fire or explosion which could cause property 
damage, personal injury or death.

WARNING: FOR YOUR SAFETY

1.

   Do not store or use gasoline or other flammable liquids or 

vapors in the vicinity of this or any other appliance

2.

   An LP cylinder not connected for use should not be stored 

in the vicinity of this or any other appliance.

3.

   Follow all leak-test procedures on page 10 of this manual 

carefully before using. Do this even if the grill was dealer 
assembled. 

Do not test for leaks with a match or any 

open flame. 

Do not try to light this grill without reading 

the “Lighting” instructions. 

The appliance is FOR OUTDOOR USE ONLY. It is not to be used inside a 
garage, other building or any type of enclosed area. Combustible materials 
should never be within 18 inches of the bottom, back or sides of your MHP 
Gas Barbecue Grill. 

 The JNR Grill head is specifically designed to fit these MHP mounting options.

 

- JC4 Four Legged Open Cart 

- OCOL/OCOLB with OM Base

 

- MPP In-ground Post 

- OCOL/OCOLB with OP Base

 

- MPB Patio/Deck Base 

- OCOL/OCOLB with OC Base

 The gas supply may be either LP or Natural Gas

BOXES/BAGS:

IMPORTANT SAFETY WARNINGS

TOOLS LIST:

ADJUSTABLE WRENCH

3/4" COMBINATION  

WRENCH

7/16" COMBINATION  

WRENCH (2)

3/8" COMBINATION  

WRENCH

PHILLIPS 

SCREWDRIVER

HH-GRATE-SS

Briquette Grate

JNR-LP

Control Panel for LP Gas Grill 

(includes hose and regulator)

s

JNR-SEAR-PK

SearMagic Cooking Grids 

OWNER'S MANUAL BAG

Includes: 
• Owner's Manual
• Temperature Gauge
• Venturi Tube Cleaner
• (2) Lid Pivot Pins 

s

HH-SS-GRID2

Stainless Steel Cooking Grid

HHDDSK

Side Shelf Kit

BRIQUETTE BAG

53 Briquettes

END CAPS/HANDLE 

Includes hardware

JNR-NAT

Control Panel for Natural Gas Grill 

You should have the following boxes/bags containing the different parts and hardware needed to assemble your grill.

OR

OR

Make sure your base is 
assembled before continuing. 

The base assembly instructions 
should be included with your base.

Visit our website mhpgrills.com/
info/owners-manuals/

  

for a complete list of assembly 
videos & manuals

Summary of Contents for JNR













Reviews: