Operating instructions iQ-Oval CDS V1-4.docx
page 14 of 66
4.
Transportation and packaging
This section provides an overview of the proper transportation of the iQ-Oval CDS.
4.1.
General Notes with Regard to Transportation and Danger Warnings
4.2.
Packaging
The iQ-Oval CDS
will be packed and delivered in several wooden crates. The crates’
exact number, weight and dimensions will vary slightly according to each model/type
of machine. Contact customer service for more information about individual orders.
4.3.
Unloading of the crates
The iQ-Oval CDS is to be unloaded by the customer. A forklift truck with adequate fork
length and lifting capacity (see 4.2 Packaging) will be required.
Upon delivery of the iQ-Oval CDS the consignment must be examined
for external damage immediately. In the case of any damages, they
must be documented and reported to Machines Highest Mechatronic
GmbH within 24 hours.
Danger of falling objects!
The following instructions must be observed
1.
Never stand or walk under hanging loads!
2.
Transportation must be carried out by qualified staff observing all
safety instructions.
3.
The iQ-Oval CDS must only be lifted at the dedicated lifting points.
4.
Only the lifting/handling devices and equipment indicated in this
document must be used for the movement of the iQ-Oval CDS.
Non-compliance may lead to serious damage of the iQ-Oval CDS
and result in cancellation of the warranty.
Danger of mechanical damage!
The iQ-Oval CDS must be lifted carefully and only at the dedicated
lifting points at the middle of the base unit. Lifting the iQ-Oval CDS
at/by any other point, especially the tables, may result in serious
damage. Be sure to maintain an adequate and safe distance during
lifting.
