3.3 Taking Measurement
1. Press the “ ” button. The cuff will automatically inflate
and the measurement will start.
2. When the measurement is complete, the cuff will
automatically deflate and your systolic and diastolic
pressure values and pulse rate will display.
3. Remove the wrist cuff and take note of your
measurement results.
Note:
You can press the “ ” button to stop inflating the
wrist cuff at any time.
3.4 Heartbeat Readings
Besides Systolic and
Diastolic values, Pulse
will also be displayed
after a measurement.
7
Note:
• Avoid smoking, eating, drinking caffeinated drinks or
exercising for 30 minutes before taking measurement.
• Do not move or talk during measurement.
3.1 Sitting Correctly
1. Relax
2. Sit upright in a chair with both feet on the floor.
3. Roll up the sleeve to bare your wrist if necessary.
Take caution not to constrict the blood flow.
4. Place your arm on a table so that the cuff will be at the
same level as your heart.
3.2 Applying the Wrist Cuff
1. Place your elbow on a table and palm
facing upward, and wrap the arm cuff
around the left wrist.
2. Pull on the end of the cuff until it wraps securely around
your upper wrist. Do not over tighten the cuff. Allow
1–2 cm or 1/2 inch between the bottom of the cuff and
your wrist joint.
3. Make sure the cuff is at the same level as your heart.
TAKING MEASUREMENT
