MH EDS O2D2 Instruction Manual Download Page 7

7

LIMITED WARRANTY

This device is classified as, and is only suitable for use as, a supplementary breathing apparatus (SBA) for aviation use.  It is intended to 
help supply the needed amount of oxygen for persons during flight altitudes where supplemental oxygen is needed.  This device is not 
suitable for any type of life support operations.  This device is not suitable for SCBA (Self Contained Breathing Apparatus), SCUBA (Self 
Contained Underwater Breathing Apparatus) or any medical operations.

Before it is put to use, it is the responsibility of any user who will use this device to become familiar with the operation and safety aspects 
of this device. Using the system improperly could cause failure and lead to possible property damage and/or personal injury. 

Mountain High Equipment & Supply Company assumes no responsibility for property damage, accidents, injury or death that may result 
from the misuse of this device/equipment. This includes any use of this device/equipment outside the scope of common sense, the 
Instruction Manual, inserts and other related documentation.

NOTICE OF NON-LIABILITY

   

The O2D2 unit emits no sound or start-up oxygen pulse when turned on:

 

1.  Check batteries to make certain they are fresh.

  

  Start-up sound is heard, but no start-up oxygen pulse delivered:

 

1.  Check oxygen cylinder valve is open.

 

2.  Check oxygen supply tube for proper connection.

 

3.  Check oxygen supply tube for obstructions.

 

4.  Check O2D2 outlet tubing for obstructions.

     The O2D2 does not trigger:

 

1.  Try using the Flared-Tip cannula included with the kit (MH part number 00EDS-1084-01)

     When using the face mask, no oxygen pulse on inhalation:

 

1.  Make sure the face mask is sealed against the skin.

 

2.  Check for obstructions on the 

O2D2

 outlet tubing.

 

3.  Use only face masks provided by Mountain High Equipment & Supply.  

 

     

NOTE: EDS face masks DO NOT have a dilution bag attached

     Oxygen pulses are delivered, but an alarm is heard at the same time:

 

1.  Check the battery to make certain it is fresh.

 

2.  Check for obstructions in the cannula/mask and tubing.

 

3.  Use only masks and cannulas supplied by Mountain High Equipment & Supply.

TROUBLESHOOTING 


  

WARNING

 

DO NOT

 

increase or decrease 

length of cannula 

or face mask supply 

tubing.

DO NOT

use the MH EPS 

(External Power 

Supply) with the 

O2D2 as the voltages 

are not compatible.

Mountain High Equipment & Supply Company warrants your MH EDS-O2D2 unit against defects in materials and workmanship for two (2) 
years from date of purchase invoice. The warranty is non-transferable. Should any part of the MH EDS-O2D2 become defective within the 
warranty period return the EDS Unit with a description of what/why it is not functioning and we will repair or replace it, at our discretion, 
free of charge (you pay only shipping to MH). 

Contact [email protected] for RMA# and Return Form

Return the Unit to:
Mountain High Equipment and Supply Company
RRO Department
2244 SE Airport Way, Suite 100
Redmond OR 97756-7537

This warranty is non-transferable and only valid if Mountain High Equipment & Supply Company determines that the system and its 
components have not been damaged due to improper use, been submerged in fluids, dismantled or abused. Mountain High Equipment & 
Supply Company reserves the right to determine if repairs are to be done under warranty or at a nominal charge. 

To activate warranty 

coverage, you must complete and return your owner’s enclosed EDS Registration Card.

7

Summary of Contents for EDS O2D2









Reviews: