Assembly instructions
Step 5
9
Attach 2xBackrest Pad Support (3) to the Backrest Pad Incline Support (4) as shown in the
diagram. Then attach it and the Seat Pad Support(5) to the bracket on the Main Base Frame(1),
aligning the holes and securing them with 1xM10x140 Allen Bolt(19), 2x 10 Washers(25),
2x 16x 11x13 Bushing(10) and 1xM10 Aircraft nut(27).
Attach the Spring Pin (17) to the Main Base Frame (1) and tighten it by turning clockwise.
Ø
Ø
Ø
Seat height adjustment - Pull the Spring Pin(17) backwards and select the seat height you desire.
(If the seat is still locked by the Spring Pin(17), turn the Spring Pin(17) counter-clockwise until it
does not lock the seat when being pulled backwards.) Then restore the Spring Pin(17) and turn it
clockwise to lock the seat firmly.
