manualshive.com logo in svg

MGL Avionics V16, User Manual

Share
Download
MGL Avionics V16 User Manual Download Page 2

Table of Contents

MGL Avionics V16 transceiver communications protocols.........................................................3

Version....................................................................................................................................3
The legal stuff..........................................................................................................................3

General........................................................................................................................................3
Frequencies.................................................................................................................................4

RS232 protocol...................................................................................................................5
General message format:...................................................................................................5
Commands:........................................................................................................................5
Format of Acknowledge message (sent by transceiver)....................................................8
Format of status message (sent by transceiver every 100mS unless setup menu is 
active).................................................................................................................................8
Format of the Setup menu message (sent every 200mS if setup menu active)................9
Technical string.................................................................................................................10

CAN bus protocol......................................................................................................................10

Messages from the V16........................................................................................................10

Status message................................................................................................................10
Menu item message..........................................................................................................11

Technical string.....................................................................................................................12

Messages to the V16........................................................................................................12

Summary of Contents for V16














Reviews:

No comments

Brands by name

Popular brands

Load more brands