Contrast …
This function allows you to change the display contrast to your liking. You can select values from
about 20 to 45. Values may vary with display types.
Calib ...
Enter the number of pulses per revolution.
You can enter fractions of a pulse in case of engines that generate a non-integer number of
pulses per revolution.
Typical settings:
Rotax 503 DCDI – 6.0
Rotax 503 Single ignition 1.0 or 2.0 depending on wiring
BL …
This function allows you to switch the display backlight on or off.
ADC
This function is for technical personal. It is not used for ordinary operation of the unit.
