MGI ZIP X3
User Manual
15
14
7.4 Battery Level Indicator
Battery indication is located on the left side of the top box
screen. Four colored bars are highlighted showing full charge. The
lesser number of bars displayed, means there is less battery life
available. You should always check the battery status before you
play golf to ensure the four bars are there.
7.5 Unit Measurements
You can move from meters / kilometers to yards / miles simply by
pressing the Unit Setting Button [on the right].
7.6 Distance Modes
There are three distance measurement modes. To move between
the modes by pressing the Distance Mode Button [DM] [on the
left]
Distance A and B: resettable distance measurements could be
used to measure how far you hit your shot and to measure how
far you have walked for the day. To reset, simply press the DM
Button [left side] for 3 seconds until the reading displays “0”.
Distance Total: cannot be reset as it is the Odometer for the life of
the caddy. This feature will assist with service reminders which are
recommended at each 500kms or 6 months periods.
7.7 Control Distance Function
The Control Distance Function enables the MGI ZIP caddy to be
sent a preset distance before the caddy auto stops. To use this
function:
It is recommended that you lock the front wheel to ensure the
caddy tracks in a straight line.
Press and hold down Speed control button for 3-4 seconds until
the speed setting changes to 5 [meters or yards] and “ADC
MODE” will appear.
Turn the Speed control button clockwise to increase the distance
or anti-clockwise to decrease the distance until the desired
distance is achieved between 5-60 [meters or yards]
Always look ahead and assess the condition of the terrain of
where you want to send the caddy prior to doing so.
Once the desired distance is reached, press the Speed control
button once to send the caddy off to the desired distance.
Summary of Contents for ZIP X3
Page 1: ...User Manual VERSION 1 6 ...