Version 1.1
OPERATING THE SILVER WATCH
IMPORTANT NOTE: Do not use excessive force when operating your
watch. The buttons are sensitive and can be damaged easily if
pushed on too hard.
IMPORTANT NOTICE: Allow the device to charge 4 – 6 hours before
using.
HOW TO CHARGE THE SILVER WATCH
Using the AC Adapter
1.
Plug the USB cable into the USB jack on the watch.
2.
Plug the USB cable into the AC adapter.
3.
Plug the AC adapter into a power outlet.
The red and red/blue indicator light will blink while
charging.
The indicator light will turn off when fully charged.
Using Your PC
1.
Plug the USB cable into the USB jack on the watch.
2.
Plug the USB cable into the USB port on your PC.
The red and red/blue indicator light will blink while
charging.
The indicator light will turn off when fully charged.
HOW TO TURN ON THE WATCH
1.
Push and hold the Power button.
The indicator light will be red/blue during initialization.
The blue light will turn on when the watch enters
standby mode
.
After 3 minutes of non-use, the watch will
automatically turn itself off.
HOW TO TURN OFF THE WATCH
1.
Push and hold the Power button.
The red indicator light will blink three times and then
turn off.
The watch is now turned off.
HOW TO RECORD VIDEO
1.
Put the watch in
standby mode
.
2.
Push the Record button.
The blue light will blink three times and then turn off.
The watch is now recording live video.
3.
Push the Record button.
The blue light will turn on.
The watch has stopped recording live video.
HOW TO USE MOTION DETECTION
1.
Put the watch in
standby mode
.
2.
Push and hold the Motion Detection button.
The red indicator light will blink three times and then
turn off.
The watch will automatically save a recording every 10
minutes and then start a new recording.
If no motion is detected for three minutes, the watch
will go back into standby mode.
3.
Push the Motion Detection button.
The blue indicator light will turn on.
The watch is no longer in motion detection mode.
HOW TO TAKE PHOTOGRAPHS
1.
Put the watch in
standby mode
.
2.
Push the Photo button.
The indicator light will turn red and go back to blue.
The watch has taken a photograph.
