JETVARNISH 3DS
User Manual
- 78 -
Substrate thickness.
File position on the substrate.
It is recommended to place the file on the center top of
the substrate.
[9] Manual
adjustment:
To adjust the position of the varnish file on the printing
substrate. move the file in X direction (horizontal) and Y
direction (vertical).
Minus “-“ signs are to move to the top or to the left.
Plus “+” signs are to move to the bottom or to the right.
You can select which unit of measure you want to use to
change the position of the file.
The X and Y (horizontal and vertical) positions are
display here.
You can click on these value to directly modify them.
Add value to move to the right or to the bottom.
Remove value to move to the left or to the top.
9.3.3
Quality
[10]
[11]
[12]
Summary of Contents for JETVARNISH 3DS
