MGI JETVARNISH 3DS, User Manual

Page: 19 / 176

JETVARNISH 3DS 2. Security and Safety Rules
User Manual - 19 -
NOTA: Printing speeds are given to indicative information and may vary according to printing substrate,
number of drop set on the data file and under full operator responsibility.
You will notice that JETVARNISH has two technical limits. The upper limit where the JETVARNISH cannot
go faster than 0.3 meter per second. The lower limitation where the JETVARNISH 3DS cannot go slower
than 0.05 meter per second.
It is not possible to print in less than 3 droplets, equivalent to 21µm of thickness.
3.3 Machine configurations
JETVARNISH 3DS:
- Paper Feeder
- Main body with the IJ Print
Engine
- Computer with the 3DS Hub
Manager
- Banner extensions
-AIS SmartScanner (might be
optional and not represented on
this picture)
Variable data option:
1D and 2D barcode reader
(camera 3) with
-JETVARNISH 3DS RIP1 (standard
VDP performances)
or
-JETVARNISH 3DS RIP2 (high VDP
performances)
Hot Foiling Option:
Inline iFOIL S module
Twin bar option:
Increase the maximum thickness
up to 200/232 µm (depending on
the 3DS Hub Manager version)