background image

10

9. Fitting your Golf Bag

Securing the top bag strap

  1. Provide a good position for the positioning of both ends of the elasticised straps

  2. Stretch the longer end of the strap and secure to the extended shorter end 

  3. The attached strap should now be connected

Adjusting the length of the top strap

 

-The plastic bar on the longer length can be adjusted to ensure the bag is secured  

 

properly in place.

Securing the lower bag strap

 

-Simply by holding the central tag, pull the elasticised strap over the bottom of the  

 

golf bag.

10. Assembling the Umbrella Holder

Your buggy comes with an umbrella holder. The umbrella holder needs to be bolted into 

position. When not in use the umbrella holder can be turned to its side. If you take your 

buggy home in your car, you may need to do that prior to folding the buggy down. 

Your umbrella holder can be adjusted both to the side and backwards and forwards. The 

umbrella is secured inside the umbrella holder by tightening the plastic bolt located near 

the top of the holder.

DO NOT LEAVE YOUR UMBRELLA UP IN THE UMBRELLA HOLDER IN WINDY 

CONDITIONS.

If the wind catches the umbrella, it could cause your buggy to tip over and cause 

damage, which will not be covered by warranty.

11. Operating the Digital Top Box

On/off and speed control button

You can either preset the buggy speed prior to taking off, or you can start the buggy 

and increase the speed to meet your requirements. The grey button in the centre of the 

handle is used to increase and decrease speed and stop and start the buggy. Simply 

pressing the button will either start or stop the buggy and simply turning the grey button 

clockwise will increase the speed and anti clockwise to lower the speed.

Summary of Contents for Hunter R200

















Reviews:

Related manuals for Hunter R200