6
4. Up/Down button:
Press the Up/Down buttons on the right hand side of the transmitter
to set the level of correction you wish to administer.
( WARNING: ALWAYS BEGIN WITH A
LOW-LEVEL SETTING IN THE INITIAL TRAINING STAGES ).
5. Channel Button:
When the CHANNEL button “1/2” is pressed, you can sync the
collar-receiver and the transmitter via different channels.
6. Y Button:
It indicates the LAUNCH button which will send the correction signal to the
collar-receiver.
7. Mode Button:
It indicates audio, vibration and static-shock correction modes on the
LCD-display screen.
8. Charging Hole:
for remote transmitter charging.
Collar receiver:
○
1.
Metal Probes attach here:
They deliver vibration and static stimuli.
○
2.
ON/OFF/Encode Button:
Turn on/off the collar-receiver; hold 5 seconds to encode the
receiver.
○
3.
Rubber Cover:
After completion of charging please put the cover securely in place to
safeguard the internal unit from dust and water.
○
4.
Charging Hole:
for collar-receiver charging.
Summary of Contents for DTC 280
Page 1: ...1 DTC 280 Pet Trainer Dog Training Collar Manual ...
Page 3: ...3 Components ...
Page 4: ...4 ...
