background image

 

51031604EN/AB

 - Page 19

3. Operation

3.4 Personalisation 

(optional)

Function

Personalisable function

Automatic start

Cold start (battery power)

Forced shutdown

Sleep mode

UPS ON / OFF via software

Default setting

Enabled

Enabled

Enabled

Disabled

Enabled

Personalisation parameters can be set and modified using the "UPS Driver" software installed on a computer that is
connected to the UPS (see section 2.3 Connection to the RS 232 (or USB) communications port).

Check that the RS 232  25  or USB  26  cable is properly connected.

"UPS Driver" installation:

1 - Insert the "UPS Driver" diskette in the drive of a PC running Windows.
2 - Select the disk drive (A:\).
3 - Double-click "upsdriv.exe".

Once "UPS Driver" has been installed, UPS parameters can be modified in a window containing a number of tabs, each
presenting a set of parameters.

"ON / OFF conditions" tab

"Battery" tab

Personalisable function

Automatic "Battery test" intervals

"Low-battery warning" threshold

Default setting

Every day

20% remaining battery backup time

Options

Once a week

Once a month

No test

40% remaining battery backup time

Options

Disabled

Disabled

Disabled

Enabled

Disabled

Summary of Contents for Pulsar EX 1000





























Reviews: